Certificate III
in Rigging
Build your career in the construction and lifting industry with practical, industry-focused Certificate III in Rigging training in Sydney.
Develop skills across dogging, basic rigging, intermediate rigging, lifting operations, working at heights, workplace safety and construction rigging.
Build the Skills to Work as a Rigger
The CPC30720 Certificate III in Rigging provides a trade outcome in rigging within the construction industry.
This nationally recognised qualification develops the knowledge and practical skills required to undertake rigging activities in construction and related industries.
Learners develop capabilities across dogging, basic rigging, intermediate rigging, working safely at heights, planning and organising work, measurements and calculations, workplace communication and construction safety.
The qualification is suited to people entering the rigging industry as well as experienced construction, crane and lifting workers seeking to develop or formally recognise their skills.
Who Is the Certificate III in Rigging For?
CPC30720 may be suitable for people looking to build a career in rigging or formalise existing construction, crane and lifting experience.
New & Developing Riggers
Build a structured pathway into the rigging industry and develop nationally recognised competencies.
Doggers & Construction Workers
Progress your existing lifting and construction experience into broader rigging competencies.
Experienced Riggers
Have your existing training, licences and industry experience reviewed for RPL or Credit Transfer where applicable.
What Will You Learn?
Certificate III in Rigging training develops a broad range of construction and rigging skills used across lifting operations and construction workplaces.
- Perform dogging and apply appropriate slinging techniques.
- Select and inspect lifting and rigging equipment.
- Perform basic rigging activities.
- Perform intermediate rigging activities.
- Work safely at heights.
- Work safely around electrical sources, services and assets.
- Plan and organise construction work.
- Read and interpret plans and specifications.
- Carry out workplace measurements and calculations.
- Apply WHS requirements and workplace procedures.
From Dogging to Intermediate Rigging
The Certificate III in Rigging incorporates key competencies across the rigging progression.
Dogging
CPCCLDG3001Licence to perform dogging.
Develop skills in slinging loads and directing crane or hoist operators where required.
Basic Rigging
CPCCLRG3001Licence to perform rigging basic level.
Progress from dogging into basic-level rigging operations.
Intermediate Rigging
CPCCLRG3002Licence to perform rigging intermediate level.
Develop competency for intermediate-level rigging activities.
Certificate III in Rigging Units
To achieve CPC30720 Certificate III in Rigging, learners must successfully complete 19 units of competency comprising 12 core units and 7 electives.
The qualification also requires 7 elective units. Electives are selected in accordance with the CPC30720 qualification packaging rules and the learner's training pathway.
Practical, Hands-On Rigging Training
Rigging is a practical occupation. FHV's training approach combines underpinning knowledge with face-to-face practical training.
Industry Equipment
Develop skills using equipment and resources relevant to rigging and lifting activities.
Practical Activities
Apply knowledge through practical rigging, planning, inspection and lifting activities.
Experienced Trainers
Learn with trainers and assessors who understand construction, lifting and rigging operations.
How Is the Course Delivered?
FHV uses a blended training model designed around the practical nature of the rigging qualification.
Theory components may be supported through online learning, trainer-led sessions and learning resources.
Practical components are completed face-to-face so learners can demonstrate the skills required by the applicable units of competency.
Training May Include
- Online theory learning
- Trainer-led theory sessions
- Face-to-face practical training
- Practical rigging exercises
- Knowledge assessments
- Practical assessments
- Workplace activities where applicable
Entry Requirements & Prerequisites
CPC30720 itself has no formal qualification-level entry requirements. However, individual units and High Risk Work Licence activities may have specific prerequisites and regulatory requirements.
FHV will review your previous training, licences, experience and intended training pathway before confirming your program.
- Appropriate identification and enrolment documentation.
- Suitable Language, Literacy and Numeracy skills.
- Ability to safely participate in practical construction and rigging activities.
- Construction induction requirements where applicable.
- Appropriate personal protective equipment.
- Prerequisite units or licences where required for particular competencies.
How Will I Be Assessed?
Assessment is competency based. Learners must demonstrate the required knowledge and practical skills to the standard specified by each unit of competency.
Knowledge
Written assessments, questioning, calculations and knowledge activities.
Practical
Practical demonstrations, observation, equipment use and rigging activities.
Evidence
Workplace documentation, projects and third-party evidence may be considered where applicable.
High Risk Work Licensing
Some units within CPC30720 relate to activities requiring a High Risk Work Licence.
Completing the Certificate III qualification does not remove the requirement to satisfy the applicable High Risk Work Licence eligibility, assessment and licensing requirements.
Where High Risk Work Licence units form part of your training pathway, FHV will explain the relevant prerequisites and training sequence.
Recognition of Prior Learning (RPL)
Already working in rigging, construction, crane operations or heavy lifting?
You may be eligible to have existing skills, knowledge and industry experience assessed through Recognition of Prior Learning.
RPL requires sufficient evidence demonstrating competency against the relevant units. The evidence required will depend on your experience and the units being assessed.
- High Risk Work Licences
- Statements of Attainment
- USI transcript
- Employment history
- Employer or supervisor references
- Work records and job sheets
- Lift or rigging plans
- SWMS and workplace documents
- Photographs and videos
- Logbooks
- Practical demonstrations
Already Hold Rigging Units?
If you have previously completed nationally recognised units included in CPC30720, you may be eligible for Credit Transfer.
This can prevent you from unnecessarily repeating training you have already successfully completed.
Bring Your Existing Records
- USI transcript
- Statements of Attainment
- Relevant qualifications
- Current High Risk Work Licence
FHV can review your documents and determine what may be recognised toward CPC30720.
Where Can a Rigging Qualification Take You?
The occupational outcome associated with CPC30720 Certificate III in Rigging is Rigger.
Construction Rigging
Support lifting and rigging activities across construction projects.
Structural Steel
Work around structural components, lifting equipment and crane operations.
Crane & Lifting Operations
Apply rigging skills around cranes, loads and lifting operations.
Industrial Projects
Rigging skills may be applied across industrial construction environments.
Infrastructure
Develop transferable rigging capabilities relevant to major construction projects.
Career Progression
Build on dogging and rigging experience and continue developing specialist skills.
Why Choose FHV for Rigging Training?
Practical Training
Develop practical skills in an environment focused on construction, lifting and high risk work.
Industry Focused
Training is designed around the skills required in real construction and rigging environments.
Western Sydney
Practical training available from Yennora in Western Sydney.
Rigging Pathway
Develop skills across dogging, basic rigging and intermediate rigging.
RPL Available
Experienced workers can discuss recognition of existing skills and experience.
Credit Transfer
Existing nationally recognised units may be credited where applicable.
Looking for an Employer-Based Training Pathway?
View our separate information page about Certificate III in Rigging workplace training pathways.
Certificate III in Rigging FAQs
What is CPC30720 Certificate III in Rigging?
CPC30720 Certificate III in Rigging is a nationally recognised qualification that provides a trade outcome in rigging within the construction industry.
How many units are in Certificate III in Rigging?
CPC30720 requires successful completion of 19 units of competency comprising 12 core units and 7 elective units.
Does Certificate III in Rigging include dogging?
Yes. CPCCLDG3001 Licence to perform dogging is one of the core units in CPC30720.
Does Certificate III in Rigging include Basic Rigging?
Yes. CPCCLRG3001 Licence to perform rigging basic level is a core unit within the qualification.
Does Certificate III in Rigging include Intermediate Rigging?
Yes. CPCCLRG3002 Licence to perform rigging intermediate level is included as a core unit within CPC30720.
Can experienced riggers apply for RPL?
Experienced workers may be eligible for Recognition of Prior Learning. Eligibility depends on whether sufficient current evidence can be provided to demonstrate competency against the relevant units.
Can I receive credit for rigging courses I have already completed?
Where you have already successfully completed equivalent nationally recognised units, Credit Transfer may be available. Provide FHV with your USI transcript and Statements of Attainment for review.
Where is the rigging training held?
FHV practical rigging training is available at 200 Military Road, Yennora NSW 2161 in Western Sydney.
Is the Certificate III in Rigging only online?
No. While theory components may be supported through online learning, practical rigging skills require face-to-face training and assessment as applicable to the units being completed.
Do I automatically receive a High Risk Work Licence?
No. High Risk Work Licence activities are subject to separate regulatory requirements. Learners must satisfy the applicable eligibility, assessment and licensing requirements.
Ready to Take the Next Step?
Speak with FHV about CPC30720 Certificate III in Rigging, your existing licences and experience, upcoming training and the most appropriate pathway for you.